How to Attach a SmallRig Cage to Canon EOS R50

Quick answer

Attach the SmallRig Full Camera Cage to your Canon EOS R50 by aligning the camera body with the cage base, securing the bottom screw, and then tightening the side clamp for a snug fit.

Step-by-step attachment process

1. Prepare the camera and cage: Turn off the camera and remove any lens cap or strap that might interfere. Place the camera on a clean, flat surface. Inspect the cage for any debris or damage that could scratch the camera body. Check that the cage's mounting plate is clean before you start.
2. Align the camera with the cage base: Position the Canon EOS R50 over the cage base so that the camera's tripod socket lines up with the cage's bottom screw hole. Gently lower the camera into the cage, ensuring the body sits flush and the side clamp is open. If the camera doesn't sit flush, lift it and realign instead of forcing it down.
3. Secure the bottom mounting screw: Use a coin or a flathead screwdriver to tighten the 1/4"-20 screw at the base of the cage. Turn it clockwise until it is snug, but do not overtighten. You want the camera to be held firmly without stressing the tripod socket. Stop tightening as soon as you feel resistance; overtightening can damage the socket.
4. Close and tighten the side clamp: The cage has a clamp on the left side. Close it over the camera body and tighten the locking mechanism until the cage is secure. The clamp should hold the camera without leaving gaps or allowing movement. A properly closed clamp leaves no play between the camera and the cage.
5. Test accessory mounting points: Once the cage is attached, check the multiple 1/4"-20 and 3/8"-16 threads, the cold shoe mount, and the NATO clamp on the left side. Attach a lightweight accessory like a microphone to confirm the threads are accessible and the cage is stable. If an accessory won't thread smoothly, do not force it—verify the cage alignment.

Product facts

• SmallRig Full Camera Cage for Canon EOS R50: The SmallRig Full Camera Cage for Canon EOS R50 is formfitting and provides maximum protection to your camera while adding multiple mounting points. The snug fit ensures the cage stays secure during video shoots, and the extra threads let you attach accessories without adding bulk.